Screen Filter - Self Cleaning Model SE
-
Minimum operating pressure: 14.5 psi
-
Maximum operating pressure: 145 psi
-
Clean filter pressure loss: 1.45 psi
-
Maximum water temperature: 149ºF
-
Filtration range:
50 - 3000 micron
- Electric Motor:
3-phase 0.5 Hp
-
Control system:
PLC electric control board
-
Flush water consumption (at minimum working pressure): 12 gallons
-
Filter housing materials: carbon steel coated with baked on epoxy
Screen Filter Filtration
Water enters the filter through the "Inlet" (1) and passes through the coarse screen (2) that functions as a "first stop" for rough particles. Water then reaches the fine screen (3), which further purifies the flow by separating smaller particles from the water. As more water flows through, impurities build up on the fine screen. As impurities on the screen accumulate, a pressure imbalance is built up between the internal section of the fine screen (3) and its external section.
Screen Filter Cleaning Process
When the difference in pressure reaches the preset value on the differential pressure indicator, a series of events is triggered while the water continues to flow to the system units. The flushing valve (4) opens, and water flows outside. Pressure in the hydraulic flushing chamber (5) and the dirt collector (6) is signifigantly lowered resulting in a suction process via the suction nozzles (7) to the dirt collector (6) and from there through the flushing valve (4) outside. The electric motor (8) simultaneously rotates teh dirt collector (6) and moves it along its axis. The combination of the linear movement and rotation effciently cleans the entir internal screen.
The flushing cycle continues as long as the pressure differnce between the inlet and outlet remains the same and according to signals from the controller. If the pressure difference remains unchanged for a fixed preset time, the emergency flushing valve (9) opens along with the norma flushing valve (4). The flushing cycle continues for the time that was preset on the controller. The flushing valves (9) & (4) close when the pressure difference on the pressostat drops. The operation of the electric motor is stopped after the collector axis reaches the internal or external limit switches. The filter is now ready for the next cycle, with clean and filtered water flowing throught the "Outlet" (10).
Screen Filter Special Options and Features
- Electric Current: 110V, 220V, 3-phase, single phase, 24V and solar energy
- High Pressure Rating psi: 230, 350, 550
- High Temperature Range: Withstands temperatures up to 203ºF
- Anti Frost - special control system for cold climate
- Stainless Steel Grades: 304 or 316
- Available controls - Electronic, timer, air-actuated, computerized and custom designed
- Special Coating - Prevents deterioration from exposure to sale/sea water
Screen Filter Sectors Served
Screen Filter is used in a wide range of applications in the Agricultural, Industrial, Municipal and Commercial sectors. The main industries include: steel mills, petroleum, plastics, chemicals, electronics, textile, paper mills, food, beverage and power stations.
Screen Filter typical applications include: cooling towers, heat exchanger protection, ion exchange protection, industrial wastewater recycling, effluent polishing water supply and filtration for micro irrigation.
Self Cleaning Filters Brochure
Automatic
| B Series | E Series | H Series | SE Series | MiniTwist
|
