Arctic FHP Series Filter Bag Housing

Arctic,FHP,Series,Filter,Bag,HousingThe Arctic FHP Series is our premium line of Filter Bag Housings. It is
designed to meet and exceed the most stringent operational requirements. Its
pressure rating of 300PSI @ 232° C (450° F) rating with 300# Flanges allows
it to be installed in severe applications where superior filter performance is
demanded.

The FHP premium performance Over the Top (OT) design gives the highest
efficiency for contaminant loading and therefore less frequent filter bag
change-outs. In this design the filter bag is located at the top of the housing to
facilitate easier changes.

Our FHP Series is available in sizes P1 and P2 in both Carbon Steel and
316SS with both NPT and flanged connections.

Features

  • High quality casting with only 2 welds giving smooth internal surfaces.
  • Design pressure of 300 PSI @ -29º C to 232º C (-20º F to 450º F).
  • CRN Registered and ASME rated.
  • Up to 180 US GPM with less than 2 PSI pressure drop.
    (Based on water-like viscocity and a clean filter bag.)
  • Single cast dome shaped cover.
  • Positive seal between cover and filter bag prevents leakages.
  • Heavy duty 316SS retainer basket for maximum chemical resistance.
  • Adjustable height tripod leg stand.
  • Cover rest to facilitate bag change-out.
  • Both inlet and outlet gauge connections.
  • 100% hydraulic testing ensuring quality and performance.

Options

  • Mesh Lined Retainer Basket (Eliminates need for filter bag.)
  • 304 Stainless Steel Hardware
  • ANSI Flanged Inlet and Outlet Kits
  • Optional O-Ring Materials in Buna N, EPR, Viton Encapsulated Teflon
  • Electro Polishing
  • Displacement Balloons
  • Pressure Gauges and Switches
  • Duplex or Multi-Plex Assemblies upon Request

Typical Applications

  • Incoming Plant Water (city or well supply)
    Unexpected contamination from piping corrosion, silt, well sand or even from off-site municipal pipe line maintenance can cause significant and costly process problems.
  • Heat Exchange Circuits
    Contaminant build up in open or closed loop heat exchange systems greatly lowers system efficiency. Bag filter systems in the loop will help maintain efficiency and reduce maintenance costs.
  • Equipment Protection
    Valves, pump seals, spray nozzles and other process equipment all need protection from unwanted solids. A low pressure drop bag filter system is an economical and efficient way to provide this protection.
  • Purifying Finished Products
    Bag filter system are ideal to clarify or classify a wide variety of liquid products; High viscosity inks, ointments, paints, varnishes and adhesives or lower viscosity food products, household cleaners, industrial chemicals or many other liquids.
  • Pre Filtration
    Bag filters are ideally suited to protect and extend the life of more expensive downstream filtration elements. (RO, DI, etc.)

Downloads

Arctic,FHP,Series,Filter,Bag,Housing FHP Series
Arctic,FHP,Series,Filter,Bag,Housing General Data
Arctic,FHP,Series,Filter,Bag,Housing Ordering Guide

    Contact Us

    Your Name *

    Your Email *

    Telephone *

    I would like to know more information about the following:*

    Pelmar Engineering


    Call Our Application Specialists at 1-888-754-6329