The Model FP 450-65 Level Control Valve with Bi-Level Electric Float is a hydraulically operated, diaphragm actuated, control valve that controls reservoir filling in response to an electric float switch signal. The valve fully opens at pre-set low level and shutts at pre-set high level.
Features:
Line-pressure driven – Independent operation
Bi-Level electric float switch
– On/off service
– No hydraulic sensing tubes
– Suited to various float switches
Solenoid controlled
– Low power consumption
– Normally Open or Normally Closed main valve
Fully supported vulcanized diaphragm
– Rugged radial seal disk
– Protected diaphragm
Balanced rolling-diaphragm
– High flow capacity
– Very low opening & closing pressure requirement
In-line serviceable – Easy maintenance
Flexible design – Easy addition of features
External installation – Pilot operated
Typical Applications
Infrastructure Installation
Reservoirs vary in their characteristics – location, elevation, filling and emptying flow and pressure, surface area, etc.
These various characteristics require various level control valve solutions.
The Model FP 450-65 is the ideal solution for level control in reservoirs – shallow and deep, low and high elevation, rooftop and basement, in water towers, and wherever electric power is available.
Operation
The Model FP 450-65 Level Control Valve with Bi-Level Electric Float is a hydraulically operated, diaphragm actuated, control valve that controls reservoir filling in response to an electric float switch signal. The valve opens at pre-set low level and shuts off at pre-set high level.