Filtomat SAF Series Automatic Filters

  • For flow rates up to 400 m³/h; 1,760 USgpm
  • Filtration degrees from 500 to 10 micron
  • Filter area 1500 – 6000cm²; 233 – 930 in²

80 m³/h
350 USgpm
Filtomat, SAF, Series, Automatic Filters, Pelmar, Engineering
150 m³/h
660 USgpm
250 m³/h
1100 USgpm
Filtomat, SAF, Series, Automatic Filters, Pelmar, Engineering
400 m³/h
1760 USgpm

The SAF series are automatic filters, with a self-cleaning mechanism driven by an electric motor.  The SAF filters are designed to work with various types of screens in filtration degrees from 500 To 10 micron.

Filtering Process:

The water enters through the inlet pipe into the coarse screen from outside in, and through the fine screen from inside out. The “filtration cake” accumulates on the fine screen surface and causes head loss To develop. The coarse screen is designed To protect the cleaning mechanism from large dirt particles. It should not accumulate large quantities of suspended solids and is not cleaned automatically.

Self-cleaning process:

The SAF filter will start the self-cleaning process when the pressure differential across the screen reaches a pre-set value or a predetermined lapse of time. Cleaning of the filter element is carried out by the suction scanner, which rotates in a spiral movement while removing the filtration cake from the screen, and expels it out through the exhaust valve. The rotation of the scanner is operated by a 2-way (fwd/rev) drive unit that is attached to the scanner by a threaded shaft, providing the linear movement.

The exhaust valve is activated For the duration of the cleaning cycle by a 3-way solenoid. During the self-cleaning process, which takes approximately 35 seconds, filtered water continues To flow downstream.

Filtomat, M300, Series, Automatic, Filters, Pelmar, Engineering   SAF Series Filters Brochure

Filtomat Automatic Filters | M100 | M300 | SAF | EBS | MiniTwist


    Contact Us

    Your Name *

    Your Email *

    Telephone *

    I would like to know more information about the following:*

    Pelmar Engineering

    Call Our Application Specialists at 1-888-754-6329