Vortex A/C™ – Panel Cooling System
Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!
Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C™ noise level is 73% less than other conventional, vortex type cabinet panel coolers. When the thermostatically-controlled Vortex A/C™ is operating, the decibel level is about the same as normal human conversation!
This next generation in panel cooling, Vortex A/C™ cabinet panel cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 80° to 90°F. Requiring only a compressed air supply to operate, the UL listed Vortex A/C™ quickly installs in a 1.5″ knockout hole to keep electrical control panels cool, clean and protected.
When the going gets tough…
Using vortex tube technology, cold air is generated by the Vortex A/C™ from the compressed air supply and is distributed throughout the enclosure. Since ambient air never enters the cabinet, it’s perfect for harsh, dirty environments. In fact, the Vortex A/C™ features an optional “purge-air” port that, when opened, will provide a constant positive pressure inside the enclosure to purge the cabinet of any contaminated surrounding air. Withstanding extreme temperature conditions, the Vortex A/C™ will provide reliable cooling operation in environments up to 175°F (79° C).
Compare the Differences
Vortex A/C™ | Refrigerant-based Air conditioners |
|
Physical Size (in cubic inches) | 160 | 3200 to 5200 |
Average Installation Time | 15 min. | 3 hours |
Maximum Ambient Temperature | 175°F (79°C) | 131°F (55°C) |
Operating noise level | 62-64dBA | 62-64dBA |
Optional continuous enclosure purge | Yes | No |
Warranty | 10 Years | 1 Year |
Please contact us for assistance in sizing a Vortex A/C™ panel cooling system for a specific enclosure, or use the following:
Sizing & Selection Interactive Worksheet |
UL Listed models 7015, 7025, and 7035 are the approved Vortex A/C™ cabinet panel coolers used in the Vortex A/C™ panel cooling systems, models 7715, 7725, and 7735. These panel cooling systems include the Vortex A/C™ cabinet panel cooler, a compressed air filter, and a cold air ducting kit.
See “Models and Specifications“.
Features and Benefits of the Vortex A/C™ Panel Cooling System
Compared to a refrigerant-based air conditioner, a Vortex A/C™ Panel Cooling System:
- Is half to 1/3 the cost
- Is less than 1/10th the size
- Installs in a fraction of the time
- Requires no electrical connections
- Has a warranty that’s 10 times
- longer
Operation of a Vortex Cooler offers the most affordable, reliable and easiest to install of any thermal protection product available for electrical enclosures!
Patent Pending
- UL listed
- Approved for NEMA Type 4 and 4X enclosures
- Models for 900, 1500 and 2500
- BTUH of cooling
- Top or Side Mounting
